Electric Conductive TPU Powder

Name: Electric conductive TPU powder for SLS 3D printing

Brand: MOPHENDE3D CT90A

Introduction: Powder, Black. Prepared by special processing technology. Small particle size and narrow particle size distribution. Suitable for SLS 3D printing. Excellent electric conductivity and better than ordinary injection molding products.

Application: Intelligent Wearable Equipment, Piezoresistive Sensor, Complex Structure Heater, Flexible Electronics, etc.

Performance Date Sheet

	Physical Property	Test Method	Units	Typical Value
Physical property	Density	ISO1183	g/cm³	1.2
Physical property	Melt Index	ISO1133(190℃, 2.16kg)	g/10min	18
Thermal Property	Tc	ISO11357	℃	98
	Tg2	ISO11357	℃	132
	Tm	ISO11357	℃	167
	Vicat-softening Temperature		℃	100
Mechanical Property	Tensile Strength	DIN 53504	MPa	8
Mechanical Property	Elongation at Break	DIN 53504	%	360
Electric Conductivity	Volumetric Conductivity	Four-probe	S/m	0.15
Character of Powder	D10	Laser Diffraction Method	μm	46
	D50	Laser Diffraction Method	μm	86
	D90	Laser Diffraction Method	μm	133
	Bulk Density	CBD	g/cm³	0.428

The above data is for reference, the actual performance can be adjusted.

Processing Parameters Sheet

Due to the large variety of machines and part geometries given process parameters can only be seen as an orientation.

Items	Units	Values
Processing Temperature	℃	100
Piston Heater	℃	80
Scan Speed	mm/s	7000
Hatch Distance	mm	0.08
Layer Thickness	mm	0.1
Laser Power	W	60