PDMS Powder

Name: PDMS elastomer powder for SLS 3D printing

Brand: MOPHENDE3D P6M

Introduction: Powder,White. Prepared by special processing technology. Small particle size and narrow particle size distribution. Suitable for SLS 3D printing. Good Biocompatibility and elasticity.

Application: Soles, Insoles, Fashionable Underwear, Bicycle Pads, Microfluidic Chips, Orthopedic Components, Artificial Skin, MedicalImplants, Animation Models, etc.

Performance Date Sheet

	Physical Property	Test Method	Units	Typical Value
Physical property	Density	ISO1183	g/cm³	0.8
Physical property	Melt Index	ISO1133(190℃, 2.16kg)	g/10min	11
Thermal Property	Tg	ISO11357	℃	67
Thermal Property	Tm	ISO11357	℃	155
Mechanical Property	Tensile Strength	DIN 53504	MPa	3.2
Mechanical Property	Elongation at Break	DIN 53504	%	65
Character of Powder	D10	Laser Diffraction Method	μm	49
	D50	Laser Diffraction Method	μm	96
	D90	Laser Diffraction Method	μm	163
	Bulk Density	CBD	g/cm³	0.347

The above data is for reference, the actual performance can be adjusted.

Processing Parameters Sheet

Due to the large variety of machines and part geometries given process parameters can only be seen as an orientation.

Items	Units	Values
Processing Temperature	℃	85
Piston Heater	℃	80
Scan Speed	mm/s	7000
Hatch Distance	mm	0.08
Layer Thickness	mm	0.1
Laser Power	W	60